 |
| Quantity: | |
|---|---|
type60
YOVON
Usage: It is mainly used in the production of small diameter and short length paper tubes, such as plastic film tubes, electronic fireworks tubes, toilet paper tubes and wrapping paper cans.
Overview: 1.The cutting table is equipped with servo synchronous multi-knife cutting,which can complete the production of multi-section short paper tube online.
2.The mold is screw tight,easy to replace.
3.Small model, small footprint, energy saving and high efficiency, fast production speed.
| Machine type | Type60 Two head CNC multi-knife paper tube machine | ||
| Technical parameter | Control system | ||
| Number of base paper | 2-9Layer | PLC controller | Special product |
| Paper tube diameter | 15-60(mm) | Human-computer interface | Special product |
| The thickness of the tube | 1-5(mm) | Uuivertor | Robin Kang/Enregi |
| Minimum cutting length | 90mm | Intermediate relay/contactor | OMRON/Chint Group |
| Speed | 0-30(m/min) | Button | Siemens |
| Fixed length mode | Numerical control | Scram | Siemens |
| The head of wind | Double head single belt | Rotary knob | Siemens |
| Cutting way | Automatic CNC tracking cutting | Signal element(Approach switch) | OMRON/Beckoning |
| Control mode | Numerical control | Pneumatic element | AirTAC/Tianao/Detais/Chendy |
| Voltage | 380V/220V | Solenoid valve | AirTAC |
| Knife | 5 | Synchronous traching system | Servo motor |
| Operation person | 1-3person | Equipment | |
| Size(mm) | Cutting table | Stainless steel table | |
| Main machine size:L*W*H | 4300*1500mm*1800mm | Paper holder type | Right Angle fixed lifting paper holder |
| Cover acreage:L*W | 11000mm*5000mm | For glue | Stainless steel heating automatic cycle double-side gluing |
| Main machine weight | 1300kg | Paper tape for lubricating oil | Stainless steel tank,self-lubricating |
| Total weight | 2104kg | Scrap paper | Automatic alarm |
| Drive system | Bottom and top equipment | Stainless steel bottom paper rack,top paper basin | |
| Power | 2*3.7kw | Paper guide wheel | Stainless steel pipe |
| Rotate speed | 1400r/min | Core mold fixing method | Bolt jacking |
| Hub drive | 2 wheel drive | Reelpipe mandril | 1pcs |
| Hub diameter | 200mm | Reelpipe belt | 1pcs |
| Hub height | 300mm | Application tool | A set of inner hexagon |
| Cutter motor | 1.5kw 1:10 | ||
| Linear guideway | Spuare | ||
Usage: It is mainly used in the production of small diameter and short length paper tubes, such as plastic film tubes, electronic fireworks tubes, toilet paper tubes and wrapping paper cans.
Overview: 1.The cutting table is equipped with servo synchronous multi-knife cutting,which can complete the production of multi-section short paper tube online.
2.The mold is screw tight,easy to replace.
3.Small model, small footprint, energy saving and high efficiency, fast production speed.
| Machine type | Type60 Two head CNC multi-knife paper tube machine | ||
| Technical parameter | Control system | ||
| Number of base paper | 2-9Layer | PLC controller | Special product |
| Paper tube diameter | 15-60(mm) | Human-computer interface | Special product |
| The thickness of the tube | 1-5(mm) | Uuivertor | Robin Kang/Enregi |
| Minimum cutting length | 90mm | Intermediate relay/contactor | OMRON/Chint Group |
| Speed | 0-30(m/min) | Button | Siemens |
| Fixed length mode | Numerical control | Scram | Siemens |
| The head of wind | Double head single belt | Rotary knob | Siemens |
| Cutting way | Automatic CNC tracking cutting | Signal element(Approach switch) | OMRON/Beckoning |
| Control mode | Numerical control | Pneumatic element | AirTAC/Tianao/Detais/Chendy |
| Voltage | 380V/220V | Solenoid valve | AirTAC |
| Knife | 5 | Synchronous traching system | Servo motor |
| Operation person | 1-3person | Equipment | |
| Size(mm) | Cutting table | Stainless steel table | |
| Main machine size:L*W*H | 4300*1500mm*1800mm | Paper holder type | Right Angle fixed lifting paper holder |
| Cover acreage:L*W | 11000mm*5000mm | For glue | Stainless steel heating automatic cycle double-side gluing |
| Main machine weight | 1300kg | Paper tape for lubricating oil | Stainless steel tank,self-lubricating |
| Total weight | 2104kg | Scrap paper | Automatic alarm |
| Drive system | Bottom and top equipment | Stainless steel bottom paper rack,top paper basin | |
| Power | 2*3.7kw | Paper guide wheel | Stainless steel pipe |
| Rotate speed | 1400r/min | Core mold fixing method | Bolt jacking |
| Hub drive | 2 wheel drive | Reelpipe mandril | 1pcs |
| Hub diameter | 200mm | Reelpipe belt | 1pcs |
| Hub height | 300mm | Application tool | A set of inner hexagon |
| Cutter motor | 1.5kw 1:10 | ||
| Linear guideway | Spuare | ||
